● Recommended PSI according to the model:

- G17 (metal slide): 130 to 160 PSI
- AAP-01: 100 to 140 PSI

For optimal performance, it is advised to use the recommended PSI ranges mentioned above. The air volume of the kit differs from that of a gas magazine due to the limited space in the grip.

● The magazine featured in the photo is for demonstration purposes only and is not included with the kit (available separately).

● Air intake is done through a 6mm tube where an EU/US connector can be attached (not included).

● Magazines:

- Fill your magazines as shown in the diagram (there should be no empty spaces between the BBs).
- Do not release the magazine follower abruptly once the spring is compressed, as it may damage the magazine lips.
- To preserve the spring, avoid storing filled magazines for extended periods of inactivity.
- Do not fire when the magazine is not engaged in the replica to prevent damage to your replica's nozzle.
- Each magazine is designed and tested to withstand normal usage conditions. However, they are not indestructible!
- Magazines undergo meticulous inspection before each shipment. Any damages incurred will be your responsibility, as magazines will not be accepted for return or refund.

(The content stated concerns only the original standard product, excluding options, and may therefore vary depending on the added options).

* The replica shown in the photo as well as the accessories are for demonstration purposes only and are not all included in the sale. Please read the “Content” section carefully.